Bedini BA-801 Pure Class A Power Amplifier

Audio Research HD220:

Power output: 220 watts per channel into 8Ω (stereo)

Frequency response: 0.5Hz to 200kHz

Gain: 20.8 dB

Input sensitivity: 4V

Signal to noise ratio: 112dB

Speaker load impedance: 4Ω (minimum)

Valve complement: 2 x 6H30, 2 x 6922

Dimensions: 483 x 222 x 495mm

Weight: 26.8kg

KR Audio Antares VA-320:

Single-Ended Tube Amplifier - Pure Class A, Zero Feedback

Output Tubes 2 x KR 842VHD
Output Power 2 x 20 Watts RMS (THD=3%)
Bandwidth 20 Hz-20 kHz (-3dB)
Output Impedance 4, 8 Ohms
Input 1V RMS / 47k Ohms at 20 W
Dimensions (w/h/d) 38.5 x 25.5 x 55 cm (approx)
Weight Approx. 38kg (approx)

Hind 2499.-

Audio Valve Baldur 70:

Description: Push-pull, class-A, triode monoblock power amplifier. Tube complement: two 2AU7, 12AX7, two 6N6P; four 6AS7G. Maximum power output: 70W into 8 ohm load at 1% distortion (18.5dBW). THD at rated output: 0.3% (50W, 100Hz–10kHz). Power bandwidth: 10Hz–50kHz ±3dB. Damping factor: 20. Input sensitivity: 0dBm (775mV).
Dimensions: 12.8" (325mm) W by 11.8" (300mm) H by 15" (385mm) D. Weight: 35.25 lbs (16kg).

Bedini BA-801 Pure Class A:

Hind 799.-

Audia Flight 100 MK2:

Audia Flight 100 – A Pure Class A Power Amplifier
Technical Data
Output power W rms 8/4/2 ohm 100/200/400
Gain 26 dB
Input sensitivity 1.41 Vrms
Frequency response (1W rms -3dB) 0,3 Hz ÷ 1 MHz
Slew-Rate (on 8 ohm) > 200 V/μS
THD < 0,05 %
S/N Ratio 108 dB
Input impedance Unbalanced 24, 28, 42, 57 Kohm
Balanced 23 Kohm
Damping factor (on 8 ohm) 85
Main voltage AC (50-60Hz) 100, 110-115, 220-230, 240 V
Power consumption 500 W, 1400 W MAX
Dimensions and weigth 470x245x540mm (wxhxd) - 52 Kg
Shipping dimensions and weigth 540x400x620mm (wxhxd) - 60 Kg

Hind; 3199.-