NHT 2.5i kõlarid, USA

Müüa väga hea heliga USA kvaliteetkõlarid NHT 2.5i.

Kõlarid toimivad korrektselt ja elemendid korras.

Külgede peal 8" elemendid, mis tagavad väga hea bassi.

Kõlaritel on väga positiivsed ülevaated internetis.

A unique feature with the NHT 2.5i appearance is the 21 degree toe-in angle, which NHT call “Focused Image Geometry” (see the manual for details). This makes the loudspeaker furnishing friendly to set up with no need for any additional toe-in.

The 21 degree angled baffle shape greatly increases the ratio of direct-to-reverberant sound, effectively reducing side-wall reflections and concentrating sound in the listening area.

The enclosure is rather slim and in order to have it stand firm and stable it has two metal feet’s mounted. These metal feet can use spikes or as I recommend, a soft feet from Sonic Design.

The tweeter is mounted below the mid-woofer and is slightly off-set inwards on the baffle. Next to the tweeter is a foam pad attached, presumably in order to reduce diffraction.

The effective listening height will typically be at the mid-woofer height or up to 10cm above, depending on the sitting height of the listener.

System Type: 3-way floorstand loudspeaker, “Focused Image Geometry” design
Enclosure type: Bass-reflex
Sub-woofer driver unit: Peerless 8” long-throw subwoofer.
Mid-woofer driver unit: Peerless 6.5” polypropylene mid-woofer
Tweeter driver unit: SEAS 1” fluid-cooled aluminum dome tweeter
Cross-over frequency: 3.3kHz and 100Hz.
Cross-over function: Tweeter/Mid-woofer, electrical 12db/octave high-pass and low-pass. Mid-woofer/Sub-woofer 6dB/octave high-pass and 12dB/octave low-pass
Frequency response: 29Hz – 25kHz +/- 3db
Sensitivity: 86db 1m/2.83v
Nominal impedance: 6 Ohms
Minimum impedance: 3,6 Ohms
Weight: 24kg (53lbs)
Enclosure dimensions: (height x width x depth): 96,5×17,8×39,4cm (38″x7″x15,5″)