Pioneer SA-8800 mk2/ Pioneer SA-9900 stereovõimendi

Pioneer SA-8800 mk2 on täielikult töötav võimendi. Suurepärane heli. Kokkupandud transistoridega. Hooldatud Jaapani versioon 100 volti. Kaasas astmeline trafo. Hind 490e

Model Rating

Type

Stereo pre-main amplifier

Power Amplifier Unit

Circuit system

2-stage all-stage direct-coupled parallel PP pure complimentary service OCL

Effective power
(Both channel drive, 20 Hz to 20 kHz)

75W + 75W (4 Ω)
60W + 60W (8 Ω)

Harmonic distortion factor (20 Hz to 20 kHz)

0.05% (at effective output)
0.01% (8 Ω at 30W output)
0.01% (8 Ω at 1W output)

Intermodulation distortion factor (50 hz : 7 khz = 4 : 1)

0.05% (at effective output)
0.01% (8 Ω at 30W output)
0.01% (8 Ω at 1W output)

Output Bandwidth (IHF, both channel drives)

5 Hz to 45 kHz (Distortion Factor 0.05%)

Frequency characteristic

5 Hz to 100 kHz + 0 -1dB

Input Sensitivity / Impedance

Power amp in : 1V/50k Ω

Output terminal

Speaker A / B : 4 Ω ~ 16 Ω
Speaker A + B : 8 Ω ~ 16 Ω
Headphone : 4 Ω ~ 16 Ω

Damping factor

30 (20 Hz ~ 20 kHz, 8 Ω)

S/N

110 dB (IHF, A-network, short circuit)

Preamplifier Section

Circuit system

Equalizer amplifier : First stage differential 3-stage direct connection Class A SEPP
Tone control section : first stage differential 2-stage direct connection flat amplifier
Turnover 3-stage switching NFB-type tone

Input Sensitivity / Impedance

Phono1, 2 : 2.5mV/50k Ω
Cartridge Load Capacity : 100 pf, 200 pf, 300 pf, 400 pf (for both Phono1 and 2)
Tuner, Aux, Tape play1, 2 : 150mV/50k Ω

Phono maximum allowable input

Phono1, 2 : 250 mV (1 kHz, harmonic distortion rate 0.05%)

Output Level / Impedance

Tape rec1, 2 : 150 mV
Pre out : 1V/2k Ω, 6V/2k Ω (max)

Harmonic distortion factor (20 Hz to 20 kHz)

0.02% (1 V Output)
0.1% (6 v Output)

Frequency characteristic

Phono : 20 Hz to 20 kHz ± 0.2 dB
Tuner, Aux, and Tape play : 5 hz to 50 khz + 0 to 1 db

Tone control

Bass:

± 10 dB (25 Hz, 50 Hz, 100 Hz)
Turnover frequency : 100 Hz, 200 Hz, 400 Hz

Treble:

± 10 db (8 kHz, 16 kHz, 32 kHz)
Turnover Frequency : 2 khz, 4 khz, 8 khz

Filter

Low : 15 Hz, 6dB/oct.
High : 8 kHz, 6dB/oct.

Loudness contour
(Volume -40dB)

+6dB(100Hz)
+3dB(10kHz)

Muting

-20dB

S/N (IHF, A-network
Short circuit)

Phono:75dB
Tuner, Aux, Tape play : 95 dB

Semiconductor used

Transistor : 47
Diode, etc. : 27 pcs

AC outlet

Power switch interlock : 2 systems
Power switch not linked : 2 systems

Power supply voltage

100 VAC, 50Hz/60Hz

Power consumption

150W (Electrical Appliance and Material Control Law)
410W maximum

External dimensions

Width 420x Height 150x Depth 376 mm

Weight

13.8kg

Pioneer SA-9800 Hind 890e MÜÜDUD

Model Rating
Type Stereo pre-main amplifier
Power Amplifier Unit
Circuit system Differential 1-stage all stages directly connected parallel PP pure complimentary service OCL
Effective output (both channels driven, 20 Hz to 20 kHz) 100W + 100W (4 )
80W + 80W (8 )
Harmonic distortion factor (20 Hz to 20 kHz) 0.1% or Less (Effective Output)
0.05% or Less (8 at 40W Output)
0.05% or Less (8 at 1W output)
Cross modulation distortion factor 0.1% or Less (Effective Output)
0.05% or Less (8 at 40W Output)
0.05% or Less (8 at 1W output)
Output Bandwidth (IHF, both channel drives) 5 Hz ~ 40 kHz (Distortion Factor 0.1%)
Frequency characteristic 10 Hz to 80 kHz + 0 -1dB
Input Sensitivity / Impedance Power amp in : 1V/50k
Output terminal Speaker A / B : 4 ~ 16
Speaker A + B : 8 ~ 16
Headphone : 4 ~ 16
Damping factor (20 Hz to 20 kHz) 30 or more
S/N 100 dB or more (IHF, A-network, short circuit)
Preamplifier Section
Circuit system Equalizer amplifier : A class SEPP with 2 positive and negative power supplies, one stage differential and three stage direct connection
Control amplifier : Positive and negative 2 power supply, first stage FET
Input Sensitivity / Impedance Phono1 : 2.5mV/50k
Phono2 : 2.5 to 10mV/35k , 50k , 70k , 100k
Tuner, Aux1, 2, Tape PB1, 2 : 150mV/50k
Phono maximum allowable input
(Harmonic distortion rate 0.1%, 1 kHz) Phono1:250mV
Phono2 : 250 mV to 500 mV
Output Level / Impedance Tape Rec1, 2 : 150 mv
Pre-out : 2V/1k
Harmonic distortion factor (20 Hz to 20 kHz) Not more than 0.05%
Frequency characteristic Phono (RIAA deviation) : 30 Hz to 15 kHz ± 0.2 dB
Tuner, Aux, Tape PB : 7 7 hz to 40 khz + 0 to 1 db
Tone control
Bass: ± 10 dB (25Hz/50Hz/100Hz)
Turnover Frequency : 100Hz/200Hz/400Hz
Treble: ± 10 db (8kHz/16kHz/32kHz)
Turnover Frequency : 2kHz/4kHz/8kHz
Filter Low : 15 Hz, 30 Hz, 12dB/oct.
High : 8 kHz, 12 kHz, 12dB/oct.
Muting 0, -15dB, -30dB
S/N (IHF, A-network
Short circuit) Phono : 70 dB or more
Tuner, Aux, Tape PB : 90 dB or higher

Semiconductor used Transistor : 54
FET : 2
Diode, etc. : 26 pcs
AC outlet Power switch interlock : 2 systems
Power switch not linked : 1 system
Power supply voltage 100 VAC, 50Hz/60Hz
Power consumption 190W (rated)
530W maximum
External dimensions Width 420x Height 165x Depth 403 mm
Weight 17.2kg

Pioneer SA-9900 Hind 1150e

Description

The SA-9900 is a top of the line stereo integrated amplifier with state-of-the-art technology and advanced features.

Differential amplifier circuits are employed in the equaliser, tone control and power amplifier sections.

Each amplifier section is supplied by a balanced power supply system that assures excellent DC balance and stability, while nearly eliminating switching noise during control operation.

Specifications

Power output: 110 watts per channel into 8Ω (stereo)

Frequency response: 7Hz to 40kHz

Total harmonic distortion: 0.05%

Damping factor: 30

Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 65dB (mic), 70dB (MM), 95dB (line)

Output: 150mV (line), 2V (Pre out)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 10 x FET, 74 x transistors, 33 x diodes

Dimensions: 420 x 165 x 403mm

Weight: 20kg

Accessories: hex wrench

Year: 1976